How to Verify an ELEVR Certificate of Analysis: Step-by-Step Lab Check
Quick answer: every ELEVR certificate carries the laboratory's own order number and password. Take those two codes to the laboratory's results portal, enter them, and the lab's own record of the result appears. You never have to trust a file on our website.
Most suppliers publish a PDF and ask you to believe it. We publish the codes the laboratory itself uses, so the check is independent of us. Here is exactly how to do it, step by step.
Step 1: Find your product's codes
Open our certificates page and find your product. Each entry shows two codes, for example:
- Lab order number: 100015337
- Password: 2W98E4JK
The same codes are printed on the certificate itself.
Step 2: Open the laboratory's results portal
Go to the Analiza Białek results portal (linked from our certificates page). This is the laboratory's own website, not ours.
Step 3: Enter both codes
Type in the lab order number and the password exactly as shown. The portal then displays the laboratory's own record for that test.
Step 4: Compare what you see
Check that the laboratory's record matches the certificate we published:
- The same product and declared quantity
- The same test date
- The same purity and measured content figures
- The photograph of the actual vial that was tested
If every line matches, you have verified the result with the source that produced it.
What each certificate reports
| Field | Example (BPC-157 10mg) | What it means |
|---|---|---|
| Purity (HPLC) | 99% | Share of the main peak among all detected peaks |
| Measured content | 10.02mg | Compound actually found in the vial, vs 10mg declared |
| Tested | 18 June 2026 | Date the sample was analysed |
| Method | BioBasic 8 column, H₂O/acetonitrile gradient, 0.1% TFA | How the analysis was run |
| Lab order no. | 100015337 | Your key to the lab's portal |
Frequently asked questions
Why does the password matter?
It proves the record you're viewing was issued by the laboratory, not assembled by a seller.
What if the codes don't work?
Email info@elevr.co with your order number and we'll resolve it with the laboratory.
Can I get the certificate before ordering?
Yes. The codes for every tested product are on our public certificates page before you buy.
Does this prove safety or effect?
No. A certificate records analytical results. Our products are for laboratory research only and are not medicines.
All ELEVR products are supplied strictly for laboratory research use only. They are not medicines and are not for human or veterinary use.
Related guides: How to read a peptide COA · Research peptide supplier checklist